When your siding needs work — whether it's a full replacement, storm damage, or a long-overdue upgrade — our Ward, CO crews show up prepared, price it fairly, and get it done right. No guesswork, no hidden fees.
What separates our Ward operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across CO. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Every Forge Siding project in Ward, CO comes with a written workmanship warranty. Not a verbal assurance — an actual document with our license number, a defined coverage period, and a clear process for raising any concern after project completion.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Musty smell in exterior-adjacent rooms, soft drywall near windows, or paint bubbling on interior walls all point to moisture infiltration from outside. Don't wait.
Warped vinyl often means panels were installed too tight — no expansion room for thermal movement. Over time, buckling creates gap points where panels separate at the lock, letting wind and water in.
Paint peeling from the outside isn't always a paint problem — it's frequently caused by moisture migrating through the panel from the unpainted back face. Re-painting without addressing the back-face moisture cycle just delays the failure.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Failing siding, missing housewrap, or compromised flashing at penetrations significantly reduces wall R-value and allows air infiltration. If your heating and cooling costs have climbed without a clear explanation, the building envelope is a legitimate suspect.
Every service below is performed by our own licensed crews — not passed off to a subcontractor network. We carry the tools, the product certifications, and the field experience for every scope we quote.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Ward, CO crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in CO and understand what documentation a claim requires.
Fiber cement carries a 30-year material warranty when installed by a certified contractor — but only when the installation follows manufacturer specifications precisely. Our Ward crews hold Preferred Contractor status on major fiber cement lines, meaning the full material warranty stays intact for the homeowner.
Commercial cladding projects in Ward, CO operate on different constraints than residential work: higher fastener schedules for wind-load compliance, special inspection requirements in some jurisdictions, tighter sequencing requirements with other trades, and often a need for resident or business-continuity scheduling coordination on occupied buildings. Our commercial Siding crews are familiar with the permitting landscape in CO and have completed projects ranging from 10-unit townhome communities to larger multi-family re-siding contracts.
On replacement projects, we replace trim components that are damaged or compromised regardless of the primary panel material — because leaving old, failing trim behind a new siding installation creates the exact problem the new siding was supposed to solve.
A professional siding inspection before buying or selling a Ward, CO property gives you panel-level condition documentation that general home inspectors can't produce. We use calibrated moisture meters, close-range panel assessment, and caulk probe testing to generate a written report with photo documentation and a priority-ranked deficiency list. Pre-purchase inspections have identified sheathing moisture damage on properties where the general inspection reported the siding as "functional."
These aren't marketing claims. They're the operational commitments our Ward, CO clients reference when they recommend us to their neighbors.
Every estimate we write lists materials, labor, and any permit fees as separate line items. You know what you're paying for before signing anything — no lump-sum guesses that hide markup.
Our CO dispatch operates from locally based crews — not a regional office routing jobs to whoever's available statewide. That means faster arrival windows, familiarity with local permit offices, and crews who understand Ward, CO building code requirements.
Our CO contractor license number is provided at first contact. Look it up in the state database before signing anything — we encourage it. We carry current general liability and workers' compensation; certificates are available on request.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
A crew that leaves a clean site every evening is a crew that respects the property they're working on. Our standard includes daily cleanup as a non-negotiable part of the project schedule.
Every Forge Siding project in Ward, CO closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
No mysteries, no moving goalposts. The same documented process runs on every project we take in CO.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
You receive a line-item estimate within 24 hours of the site visit. We bring material samples to the estimate meeting and walk through product trade-offs relevant to your Ward, CO property — climate exposure, HOA requirements, budget, and maintenance preference all factor into the recommendation.
Where permits are required in CO, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
The lead installer contacts you each morning to confirm the day's scope and each afternoon to report what was completed. If the inspection uncovers unexpected substrate conditions, you hear about it same-day with a written change order before we touch anything additional.
At project completion, we walk every elevation with you, confirm every scope item is complete, and hand over the close-out package: permit records, manufacturer warranty registrations, post-project photos, and our written workmanship warranty. Final payment is collected after the walkthrough sign-off — not before.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Ward, CO clients get a document they can actually reference, not a slogan.
📞 +1-844-782-0929 — Free Estimate TodayWe replaced siding on the whole house after hail damage. Forge Siding handled the insurance documentation — panel-by-panel photos, written damage report, the whole package. The adjuster approved full replacement scope on first review. Crew finished in six days, clean site every night, and the new fiber cement looks exactly like what we picked from the sample.
The estimate they provided was the most detailed written document I've received from any contractor in 20 years of homeownership. Line items for every material component, labor broken down by scope, permit fee listed separately. No surprises when the final invoice came.
I manage a 34-unit HOA community in Ward, CO. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Had a historic cedar profile on our 1920s home that needed matching for a repair section. Forge Siding sourced a custom-milled profile from a sample board, got it approved through the preservation office, and executed a repair that's completely indistinguishable from the original. Real expertise for an unusual requirement.
Vinyl siding on our 1970s ranch — they explained the expansion gap tolerances, why the installation they were replacing had buckled, and what they were doing differently. The finished product has gone through one full summer without a single moving panel.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Our Ward-based team handles every project in the service area — meaning the same crew that handles a large commercial contract is available for residential repairs in surrounding communities. Proximity matters for response time, familiarity with local inspectors, and the practical ability to return quickly if any post-project follow-up is needed.
Serving zip codes: 80481
Call our Ward, CO team now for a free on-site estimate, a written line-item quote, and a project timeline you can count on. We pick up the phone — 24/7 for emergencies, business hours for standard inquiries.
📞 Call Now: +1-844-782-0929